- Details
- Parameter
- Download
- Buy Online
Overview
FHR2404KB GPON ONT is developed by FH-NET for the broadband access market based on GPON technology to meet the needs of Telecom operators for broadband access and FTTH. Together with FH-NET OLT central office products and EMS network management system. It is fully compliant with technical regulations such as ITU-T G.984.x and technical requirement of GPON Equipment (V2.1 and above version) technical requirements specification. The device supports the up-link and down-link symmetric 1Gbps transmission rate, providing users with good QOS guarantee and flexible bandwidth allocation. Ethernet business and IP integrated services. Integrated CATV optical receiver function, together with ONU to form a single-fiber FTTH solution. Integrated wireless function, fully compliant with 802.11n/802.11ac wireless standard protocol, built-in high-gain directional antenna, wireless transmission rate up to 1200Mbps, with strong penetrating power and wide coverage, providing users with more efficient data transmission guarantee.
Features
· Plug and play, integrate auto detection, auto configuration and auto firmware upgrading;
· Support flexible QinQ VLAN,DHCP server/relay and IGMP/ MLD multicast monitoring function;
· Integrate OMCI and TR-069 remote configuration and maintenance,support diagnostic monitoring and remote disabling of fiber optical;
· Support 802.11n 300Mbps Wi-Fi(T/R)function;
· CATV function manageable,support CATV remote shutdown;
· Support NAT and firewall function;
· WAN support networking bridge, route and bridge/route mixed mode;
· Full speed 1G non-blocking switching;
· 2048 MAC address table;
· Support VLAN, transparent, tag, translation, trunk, etc.
· Integrated port monitoring, port mirroring, port rate limiting, port SLA, etc.
· Integrated IEEE802.1p QoS with four level priority queues;
· Support IPv4/ IPv6 IGMP snooping and MLD snooping;
· Support bridge, route and bridge/route mixed mode.
DATA Function Features
· Full speed 1G non-blocking switching.
· 2048 MAC address table.
· 4 LAN.
· Support VLAN QinQ, transparent, tag, translation, trunk, etc.
· Integrated port monitoring, port mirroring, port rate limiting, port SLA, etc.
· Support auto polarity detection of Ethernet ports (AUTO MDIX) Integrated IEEE802.1p QoS with four level priority queues Support IPv4/ IPv6 IGMP snooping and MLD snooping Support bridge, route and bridge/route mixed mode.
Wi-Fi Function Features
· Support Integrated 802.11b/g/n 300Mbps.
· Support 40 connections,MU-MIMO.
· Support WEP and WPA/WPA2 security protocols.
Product Specifications
Technical items |
Descriptions |
Dimension |
185*145*50mm(length*width*highs) |
Net weight |
≤0.3Kg |
Fiber port |
SC/APC (Single fiber) Downstream rate 2.5Gbps, Upstream rate 1.25Gbps |
Wavelength |
Tx 1310nm, Rx 1490nm, RF1550nm |
Fiber interface |
SC/PC |
RX sensitivity |
<-27dBm (1490nm) |
WLAN |
IEEE802.11b/g/n,300Mbps, a built-in antenna |
LAN |
1*10/100/1000Mbps+3*10/100Mbp adaptive Ethernet ports, full/half duplex, RJ45 interface |
Throughput |
Throughput can reach 900Mbps or more |
DC power |
12V 1A, external AC-DC power adapter |
POTS |
1*FXS, RJ11 connector |
Button |
Reset, power, WIFI |
Power |
≤10W |
Operation |
Working temperature: -5?+55℃ working humidity:10?90%(non-condensation) |
Storage |
Storage temperature: -30℃?+60℃ storage humidity: 10?90%(non-condensation) |
CATV Function Features
Optical Receive
-15~+2 dBm
AGC range
-8~+2 dBm
Fiber return loss
>50 dB
wave length
1100~1600 nm
Connector
SC/APC
C/N
≥ 50 dB
C/CTB
≥ 62 dB
C/CSO
≥ 61 dB
BW
40~ 1000 MHz
Output level
≥ 82 dBμV